Which One is Right for the Job?
While they look similar, winches and hoists are made to do separate things. A winch is designed to pull a heavy load horizontally over a slightly inclined or level surface, and a hoist is designed to lift a load vertically over steeper inclines that are greater than 45 degrees. Both tools can make heavy lifting tasks easier. However, it’s important to ensure you’re choosing the right equipment for the job. Learn about the differences between a hoist and a winch:
What is a Winch?
Winches are devices used to wind a cable or a rope in or out, so that the resulting tension pulls an object. The winch drum is powered manually or by air, electricity or hydraulics. Most winch drums are made of fabricated steel and are designed for a specific load capacity. A simple winch, such as a manual one, consists of a rope or cable wound around a drum or barrel. More complex industrial winches, like electric winches, are used to tow automobiles, boats or to help move pieces of heavy equipment.
Choosing the Right Winch
Winches are rated by the maximum load it can pull with only the bottom layer of rope on the drum. As the layers of wire rope increase, the line pull typically decreases by approximately 10 percent per layer. The size of winch you need for a job depends on many factors including: weight, mobility and surface level.
Here’s a quick easy formula to determine the minimum size of a winch you’ll need: multiply the gross weight of the heaviest object you plan to pull by 1.5. For example, if you plan to pull a 1,000-pound object, you’ll need a winch with a minimum of 1,500 pounds of line pull. It’s important to keep in mind that there numerous variables associated with winching, so it is best to consult with the manufacturer to verify the proper winch size for your intended application.
What is a Hoist?
Lifting heavy objects, like an engine block or construction material may seem like a perfect job for a winch, but that’s not always the case. Instead, use a hoist for jobs that require you to lift or lower a load. Hoists are typically made with chain or wire rope, and can be operated manually or by powered motors. Powered hoists include all those that are driven by electric, hydraulic or pneumatic motors. Manual hoists include all those that are ratcheted, levered or hand cranked. Electric chain hoists are ideal for mechanics and machine shops because they can be plugged into any standard electrical outlet. Air chain hoists are recommended for lifting heavy materials in flammable, dusty or dirty environments.
Choosing the Right Hoist
There are numerous hoist types out there. These tools are rated by state of loading, duration of use and area of application. These factors determine the hoist duty cycle rating ranging from H2 (light duty) to H4 (industry standard). An H2 light duty hoist means that it will run for no more than 15 percent of the work period with a maximum of 75 starts/stops per hour. A hoist with a rating of H4 means that it is rated to run approaching 50 percent of the work period and can handle a maximum of 300 starts/stops per hour.
Most common problems with hoists arise when used beyond their intended duty cycle rating. Before using a hoist, consider the task, and match the duty cycle rating accordingly. If your hoist is undersized, it can cause premature damage. Also, another important factor to consider is the environment in which the hoist will be used because duty cycle ratings work within certain temperature ranges.
Winch VS Hoist
One major distinguishing factor between a winch and a hoist is the breaking system. The majority of off-road winches are made with dynamic brakes in which the gear system is designed to automatically hold the load. Dynamic brakes use the gears in the winch for resistance making it unstable for suspended loads. For this reason, if you were to try to use a winch as a hoist, the load could slip or the gears could strip resulting in a very hazardous situation.
Hoists use mechanical braking systems that feature a physical brake which locks the suspended material so there is no line to bleed. Hoists also do not have a freespool mechanism. This makes hoists the safer option for lifting materials, since there is a reduced risk of the load slipping off. Hoists are also equipped with a load-limiting switch to prevent it from trying to lift more than its designed capacity.
Some winches are specially manufactured to double as a hoist. In order for a winch to be used as a hoist, it must have a locking brake and no freespool mechanism, or you must be able to remove or disable it. You should never use a winch as a hoist unless the manufacturer clearly states the winch is approved to use as a hoist.
Related Industry Knowledge
- Electric hoist
- Structure of electric hoist
- Part of the electric hoist
- Main classification of electric hoist
- Overview of bridge crane
- Common bridge crane
- Lifting mechanism of bridge crane
- Portal crane
- Summary of gantry crane
- Light crane
- Wire Rope Hoist VS Chain Hoist
- Advantage of Low headroom electric hoist
- Introduction of Remote Control
- The role of the limit switch
- Control system of Bridge Crane